This Brembo performance brake kit is an exact-part-number brake component for the verified 2017-2019 Jaguar XE application listed below. Match manufacturer part number KT00947, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High Carbon Cast Iron Rotors: 12.80-inch (325mm) diameter solid surface discs resist fade, improve heat dissipation, and reduce vibration for sustained braking.
• Prime Ceramic Pads (P36035N): Low-dust formula keeps wheels clean, cuts noise, and extends pad life with smooth, responsive stops.
• Complete Bolt-On Kit: Includes 2 rotors, full pad set, clips, shims, and hardware for front brake replacement without extra parts.
• OE-Matching Design: Retains factory geometry for use with stock calipers on Jaguar XE and XF models.
• Ceramic pads produce less dust than standard organic compounds.
• Bolt-on fit requires no modifications or caliper changes.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00947. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 17-20 Jaguar XE/17-21 XF Front Disc Brake Kit
• Brembo OE 17-20 Jaguar XE/16-20 XF Front Disc Brake Kit
• Brembo OE 17-20 Jaguar XE/16-23 XF Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2017-2019 Jaguar XE?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2017-2019 Jaguar XE application listed below. Match manufacturer part number KT04351, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High-Carbon Rotors: Vented 325 mm (12.80 in.) diameter with UV coating resists corrosion and cools quickly for repeated braking.
• Complete Hardware: Includes clips, shims, and anti-rattle parts for secure assembly and straightforward install.
• Low-Metallic Pads: Part P36035 (OE LR090689, T4N13434, T4N9760, GX732K021BA, T2H53847) deliver smooth engagement, low dust, and quiet operation.
• OE Equivalent Rotors: Part 09.D063.11 matches T4N1801 for exact fit with stock calipers and no balance issues.
• Bolt-on replacement requires no modifications or special tools.
• High-carbon construction handles heat from street and track use effectively.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04351. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 17-20 Jaguar XE/17-21 XF Front Disc Brake Kit
• Brembo OE 17-20 Jaguar XE/16-20 XF Front Disc Brake Kit
• Brembo OE 17-20 Jaguar XE/16-23 XF Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2017-2019 Jaguar XE?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.