This Brembo performance brake kit is an exact-part-number brake component for the verified 2011-2015 Audi A8 Quattro application listed below. Match manufacturer part number KT00B12, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High-Carbon Rotors: 356mm diameter with UV coating for corrosion resistance and Pillar Venting Technology for 40% better cracking resistance and cooling.
• Prime Ceramic Pads: Low noise vibration and dust for cleaner wheels and extended pad life on rear axles.
• Complete Kit: Includes two rotors full pad set and all fixing hardware for easy bolt-on installation.
• Durability: Rigorous Brembo production ensures reliable performance in all conditions with approximately 25 lbs total kit weight.
• OEM Specifications: Matches Audi factory standards for heat dissipation reduced vibration and quiet operation.
• Ceramic pads require minimal bedding-in for optimal low-dust performance.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00B12. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 10-18 Audi A8 Quattro/13-18 S8 Rear Disc Brake Kit
• Brembo OE 12-18 Audi A6/A6 Quattro/A7 Quattro/15-20 Porsche Macan Rear Disc Brake Kit
• Brembo OE 12-18 Audi A6/A6 Quattro/A7 Quattro/15-20 Porsche Macan Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2011-2015 Audi A8 Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.