This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2011 Audi TT Quattro application listed below. Match manufacturer part number KTX0104, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise, vibration, friction, wear and dust emissions for comfortable driving and preserved wheel appearance.
• High Carbon Cast Iron Discs: Match original manufacturer materials with higher damping coefficient to cut vibration, noise and enhance brake response.
• Improved Heat Conduction: Transfer heat quickly from braking surfaces to shorten cooling times and maintain performance under load.
• Xtra Disc Technology: Special high-carbon alloy withstands thermo-mechanical stress for longer life and dependable operation.
• High-carbon cast iron Xtra drilled rotors sized 310x22mm with 24mm center height for optimal cooling and stress resistance.
• Drilled Rotor Design: Enhance cooling and debris evacuation while fitting precisely as direct OEM replacement.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KTX0104. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2011 Audi TT Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2011 Audi TT Quattro application listed below. Match manufacturer part number KT04239, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Direct OE Bolt-On Fit: Installs without modifications using factory mounting points.
• Weight: Approx. 35 to 45 lbs.
• Low-Met Brake Pads: Provide strong braking with minimal noise, vibration, and wheel dust contamination.
• Built with premium materials including high-carbon rotors and low-met pads.
• Trusted by OEM manufacturers worldwide for braking components.
• Yes KT04239 provides direct fitment for all listed 2008-2015 Audi TT Quattro models.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04239. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2011 Audi TT Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2011 Audi TT Quattro application listed below. Match manufacturer part number KT00624, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Complete Rear Brake Kit Includes 2 UV Coated rotors + 1 set of NAO ceramic pads.
• High-Carbon Cast Iron Rotors Reduces noise and vibration while improving braking performance and heat dissipation.
• NAO Ceramic Pads Low dust, quiet operation, and excellent stopping power with minimal wear.
• Direct Replacement Bolt-on installation with no modifications required.
• 1 x Brembo P85073N NAO Ceramic Rear Brake Pad Set.
• High-carbon cast iron rotors for superior comfort and performance.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00624. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2011 Audi TT Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2011 Audi TT Quattro application listed below. Match manufacturer part number KTX4067, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Cross-Drilled Rotors (09.9768.1X): 12.21-inch (310 mm) diameter x 0.87-inch (22 mm) thick vented discs from high-carbon cast iron alloy expel gases and debris for better cooling and resistance to warping with UV-coated finish.
• Exact OE Fitment: Matches Audi part numbers like 8J0-615-601-A for rotors and pads 3C0-698-451-D, 8E0-698-451-M, 3C0-698-451-B, 4F0-698-451-A, 1K0-698-451-D for 54 mm caliper pistons with no modifications needed.
• Extended Durability: High-carbon rotors last 20-30% longer than stock while pads endure 40000-60000 miles under normal driving for reduced maintenance.
• Weight: Approximately 35-40 lbs including rotors at 15-18 lbs each.
• Complete Hardware Included: Retaining screws, synthetic lubricant for caliper pins and anti-squeal compound ensure smooth assembly and quiet operation right away.
• Low-Metallic Brake Pads (P85073): Integrally molded semi-metallic pads with shims, anti-rattle hardware and wear indicators offer high initial bite, low dust, progressive feel and performance up to 1000F in wet or dry conditions.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KTX4067. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit
• Brembo OE 08-15 Audi TT Quattro Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2011 Audi TT Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.