This Brembo performance brake kit is an exact-part-number brake component for the verified 2007-2014 Mercedes-Benz CL600 application listed below. Match manufacturer part number KT04463, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High-Carbon Xtra Discs: 360mm x 36mm cast from special alloy for superior resistance to thermo-mechanical stress, faster cooling, and reduced vibration noise.
• OE-Matching Materials: High-carbon cast iron identical to original manufacturer specs improves damping, heat transfer, and driving comfort.
• Complete Kit Contents: Includes two discs, pads, and all fixing hardware for simple secure installation without additional parts.
• Prime Low-Met Pads: Offer comfort, low dust, and performance through patented compounds with full production control equivalent to OE quality.
• Compatible with factory calipers. includes all necessary OE-style hardware.
• High-carbon materials reduce noise vibration for smoother luxury driving.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04463. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2007-2014 Mercedes-Benz CL600?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2017 Audi A5 application listed below. Match manufacturer part number KT00A51, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Minimize noise and vibration while reducing friction wear low dust emission keeps wheel rims clean and cuts maintenance needs.
• High Carbon Cast Iron Rotors: Offer higher damping coefficient to decrease vibration and noise improve brake behavior and enhance driving comfort.
• OEM-Matched Materials: Use the same high carbon materials as original manufacturer production for direct compatibility and proven durability.
• Thermo-Mechanical Resistance: Special alloy high carbon construction withstands stress for longer service life under demanding use.
• Kit ships fully assembled ready for install weight 25.35 lbs box dimensions 14 x 14 x 6 inches.
• Compatible with factory calipers and hardware on 320mm disc setups.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00A51. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2017 Audi A5?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2003-2009 Volkswagen Golf V (1K1) application listed below. Match manufacturer part number KT04371, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High-Carbon Cast Iron Discs: Provide higher damping to cut vibration and noise, improve brake feel, enhance driving comfort, and speed heat transfer for quicker cooling.
• Complete Fixing Hardware: Includes all necessary components for straightforward, secure installation without additional parts.
• OE-Matching Materials: Uses identical high-carbon alloys as original manufacturers for proven durability and consistent braking behavior.
• Xtra Disc Alloy Option: Special high-carbon formulation tested for superior resistance to thermal and mechanical stress during intense use.
• Prime Low-Met Pads: Offer comfort and focused performance through patented compounds, full production control matching OE standards for dependable stopping.
• Kit designed as direct replacement for specified VW models with 288mm x 25mm front discs.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04371. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2003-2009 Volkswagen Golf V (1K1)?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2010-2015 Mercedes-Benz GLK350 application listed below. Match manufacturer part number KT00B38, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Vented Disc Design: 288 mm diameter x 25 mm thickness with 5×112 mm bolt pattern ensures proper airflow and durability under stress.
• Prime Ceramic Brake Pads: Minimize noise and vibration for driving comfort, reduce friction wear, and produce low dust emission to keep wheel rims clean with less maintenance.
• High Carbon Cast Iron Discs: Offer higher damping coefficient than standard materials to decrease vibration and noise while improving brake behavior and driving comfort.
• OE-Matching Materials: Use the same high carbon construction as original manufacturer discs for reliable replacement performance.
• Complete kit includes two discs and pads for both front wheels, direct OE replacement with no modifications.
• Bolt-on fit using factory hardware and calipers, no machining required.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00B38. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2010-2015 Mercedes-Benz GLK350?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 1994-1997 Mazda MX-5 Miata application listed below. Match manufacturer part number KT00438, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Complete Front Kit: Includes two 256mm x 22mm vented rotors and full pad sets for straightforward OE replacement.
• Prime Ceramic Brake Pads: Minimize noise and vibration while reducing friction wear and low dust emission to keep wheel rims clean and cut maintenance needs.
• High Carbon Cast Iron Discs: Provide higher damping coefficient to decrease vibration and noise improve brake behavior and offer better heat conduction for shorter cooling times.
• OE Matching Materials: Constructed with the same high carbon cast iron used by original manufacturers for consistent performance and reliability.
• Xtra Disc Alloy: Special high carbon materials tested for greater resistance to thermo-mechanical stress during repeated hard braking.
• Bolt-on fit requires no modifications to calipers or lines.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00438. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 1994-1997 Mazda MX-5 Miata?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2010-2013 Volkswagen GTI application listed below. Match manufacturer part number KT00627, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Direct bolt-on replacement, no modification required.
• Matched rotor and pad set in one kit.
• OE Equivalent rotor geometry paired with Brembo pad compound.
• Reinstall the caliper bracket and caliper.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00627. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2010-2013 Volkswagen GTI?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2017 Audi A5 2.0T 3.2 Quattro Premium Prestige Cabriolet Coupe application listed below. Match manufacturer part number KT00B94, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Minimize noise vibration for driving comfort with low friction wear low dust emission clean wheels.
• High Carbon Cast Iron Rotors: Higher damping coefficient reduces vibration noise improves brake response enhances heat conduction quicker cooling.
• OE Matching Materials: Uses same high carbon construction as original manufacturer consistent performance reliability.
• Complete Front Kit: Includes two rotors pads all hardware straightforward replacement.
• 320x30mm Rotor Size: Vented design matches factory specs for Audi A4 A5 Q5 proper fit braking efficiency.
• Compatible with factory hardware includes new pad shims clips.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00B94. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2017 Audi A5 2.0T 3.2 Quattro Premium Prestige Cabriolet Coupe?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2015-2020 Audi A3 Premium application listed below. Match manufacturer part number KT00944, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise vibration friction wear and dust emissions for comfortable drives clean rims and lower maintenance needs.
• High-Carbon Cast Iron Discs: Provide higher damping coefficient to cut vibration noise improve brake response and enhance driving comfort.
• OEM-Matched Materials: Use identical high-carbon alloys as original manufacturer production for direct compatibility and reliability.
• Complete Front Kit: Two 288 x 25 mm 5-lug vented discs (11.34 x 0.98 in) with pads (57.2 x 58.9 x 17.5 mm) everything required for replacement.
• 288 x 25 mm high-carbon cast iron vented discs paired with Prime ceramic pads for low noise dust and wear.
• Direct bolt-on OE replacement no modifications needed.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00944. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2015-2020 Audi A3 Premium?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2003-2009 Volkswagen Golf V (1K1) application listed below. Match manufacturer part number KT04479, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Complete Disc Set: 288 x 25mm high carbon cast iron discs include all fixing hardware for simpler safer installation.
• High Carbon Material: Provides higher damping coefficient to decrease vibration noise improve brake feel and driving comfort.
• High carbon cast iron discs 288mm diameter x 25mm thickness vented design for improved thermal capacity.
• Prime Low-Met Pads: Offer comfort quality and performance focus through patented compounds full production control equivalent to OE pads.
• OE Equivalent Build: Uses same materials as original manufacturer with rigorous testing for consistent performance.
• Same high carbon materials used in factory production.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04479. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2003-2009 Volkswagen Golf V (1K1)?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2013 Audi A3 Quattro 2.0T Premium application listed below. Match manufacturer part number KT00A53, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Minimize noise and vibration for quiet comfortable braking with reduced friction wear and low dust emission to keep wheel rims clean.
• High Carbon Cast Iron Discs: Match original manufacturer materials with higher damping coefficient to reduce vibration noise and improve brake response.
• Xtra Disc Alloy: Special high-carbon materials tested for greater resistance to thermo-mechanical stress ensuring longer service life.
• Complete Kit Contents: Includes two 312x25mm drilled slotted UV-coated rotors ceramic pads abutment clips and hardware for easy replacement.
• Bolt-on fit using existing calipers no adapters needed.
• Includes all necessary hardware clips and shims for complete assembly.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00A53. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2013 Audi A3 Quattro 2.0T Premium?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2017-2021 Audi A4 Quattro application listed below. Match manufacturer part number KT04373, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High-Carbon Cast Iron Discs: 345 x 30 mm vented design offers higher damping to cut vibration noise improve brake feel driving comfort and heat conduction for shorter cooling times.
• Xtra Special Alloy Discs: High-carbon materials tested for greater resistance to thermo-mechanical stress extending service life under heavy use.
• OE Matching Construction: Uses identical high-carbon material as vehicle original manufacturer for perfect fit function and longevity.
• Q: What disc material and type are included A: High-carbon cast iron Xtra alloy vented discs 345 x 30 mm with corrosion-resistant coating plain friction surface.
• Prime Low-Met Pads: Friction material ensures smooth stops comfort quality and performance with patented compounds full production control matching OE standards.
• Bolt-on replacement using included hardware no modifications needed.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04373. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2017-2021 Audi A4 Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

Brembo OE Front Disc Brake Kit is identified by exact Brembo OE manufacturer part number KT00C20 for the application and configuration stated in this listing. Confirm the exact manufacturer part number and all current specifications before ordering.

Key Features

• Prime Ceramic Brake Pads minimize noise and vibration for maximum driving comfort.
• For Xtra discs special alloy high carbon materials are produced and tested to have greater resistance to the thermo-mechanical stress to which the brake disc is subjected.
• Also, reduced friction wear and low dust emission means aesthetically beautiful wheel rims and less maintenance.

Fitment

Select this component by exact part number, dimensions, engine or system architecture, and mating components. No broad year-make-model claim is used where the manufacturer does not publish one.

Specifications

What’s Included

One new Brembo OE brake kit identified by manufacturer part number KT00C20 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

About Brembo OE

Brembo OE manufactures automotive performance and replacement parts identified by exact part number, specifications, and published application data.

Related Brembo OE Products

• Shop all Brembo OE products
• Brembo OE Front Disc Brake Kit
• Brembo OE Front Disc Brake Kit
• Brembo OE Rear Disc Brake Kit

Frequently Asked Questions

How do I confirm KT00C20 is correct?
Select this component by exact part number, dimensions, engine or system architecture, and mating components. No broad year-make-model claim is used where the manufacturer does not publish one.

Are similar-looking parts interchangeable?
No. Match part number KT00C20, dimensions, configuration, included components, and every current manufacturer note.

What is included with this listing?
One new Brembo OE brake kit identified by manufacturer part number KT00C20 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

Installation

Follow the current Brembo OE instructions for part number KT00C20. Verify fit, clearance, system specifications, fastener torque, and safe operation before use. Professional installation is recommended when specialized tools, alignment, calibration, or fabrication are required.

Brembo OE Front Disc Brake Kit is the exact Brembo OE configuration identified by manufacturer part number KT04443 for the specifications and applications listed below. Confirm the exact manufacturer part number and all current specifications before ordering.

Key Features

• For Xtra discs special alloy high carbon materials are produced and tested to have greater resistance to the thermo-mechanical stress to which the brake disc is subjected.
• Prime low-Met pads ensure comfort and quality, with a specific focus on performance, thanks to patented solutions, full accessories and absolute control of all production stages that aim to make Prime pads equivalent to the OE.

Fitment

Use the verified year, make, and model table below, then confirm the engine, drivetrain, body configuration, factory equipment, and every current manufacturer application note.

Specifications

What’s Included

One new Brembo OE front brake kit identified by manufacturer part number KT04443 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

About Brembo OE

Brembo OE manufactures automotive performance and replacement parts identified by exact part number, specifications, and published application data.

Related Brembo OE Products

• Shop all Brembo OE products
• Brembo OE Front Disc Brake Kit
• Brembo OE Front Disc Brake Kit
• Brembo OE Rear Disc Brake Kit

Frequently Asked Questions

How do I confirm KT04443 is correct?
Use the verified year, make, and model table below, then confirm the engine, drivetrain, body configuration, factory equipment, and every current manufacturer application note.

Are similar-looking parts interchangeable?
No. Match part number KT04443, dimensions, configuration, included components, and every current manufacturer note.

What is included with this listing?
One new Brembo OE front brake kit identified by manufacturer part number KT04443 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

Installation

Follow the current Brembo OE instructions for part number KT04443. Verify fit, clearance, system specifications, fastener torque, and safe operation before use. Professional installation is recommended when specialized tools, alignment, calibration, or fabrication are required.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2005-2006 Mercedes-Benz CLK55 AMG application listed below. Match manufacturer part number KT00C24, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise and vibration for driver comfort while offering low friction wear and minimal dust to keep wheels clean.
• High Carbon Cast Iron Discs: Provide higher damping to cut vibration and noise improve brake response and enhance heat conduction for quicker cooling times.
• Xtra Disc Alloy: Uses special high carbon materials tested for superior resistance to thermo-mechanical stress during aggressive braking.
• Complete Kit: Includes two front rotors and pads with all necessary components for straightforward replacement.
• OE Matching Materials: Produced with the same quality as original manufacturer discs for direct compatibility and dependable performance.
• High carbon construction withstands repeated high-heat stops without warping.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00C24. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2005-2006 Mercedes-Benz CLK55 AMG?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2014-2019 Mercedes-Benz CLA45 AMG 4Matic application listed below. Match manufacturer part number KT04488, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Xtra High Carbon Discs: Made from special alloy high carbon cast iron for greater resistance to thermo-mechanical stress improving durability under heavy use.
• Complete Installation Hardware: Includes all necessary fixings supplied with discs for simpler and safer direct replacement.
• Kit components include 2 Xtra discs (355mm diameter 32mm thickness min 30mm) and Prime pad set (dimensions 248mm x 72mm x 18mm).
• Prime Low-Met Pads: Offer comfort and quality with patented solutions focused on performance equivalent to OE pads through complete production control.
• High Damping Coefficient: Reduces vibration and noise compared to standard materials for better brake behavior and driving comfort.
• All hardware included for bolt-on fit torque to OE specifications.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04488. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2014-2019 Mercedes-Benz CLA45 AMG 4Matic?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2012-2016 Mercedes-Benz SLK55 AMG application listed below. Match manufacturer part number KT04253, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High-Carbon Cast Iron Discs: Provide higher damping to minimize vibration and noise plus improved heat conduction for shorter cooling times and better driving comfort.
• Complete Fixing Hardware: Includes all necessary components for straightforward and secure installation without additional parts.
• OE-Matched Materials: Uses identical high-carbon alloys as original manufacturer production for direct compatibility and reliability.
• Discs measure 360mm x 36mm diameter and thickness for precise fit.
• Prime Low-Met Pads: Offer comfort and consistent performance with patented friction materials focused on low dust and noise while matching OE quality.
• Boxed for protection during transit measuring 19.7 x 19.7 x 7.9 inches.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04253. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2012-2016 Mercedes-Benz SLK55 AMG?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2012-2018 Mercedes-Benz CLS550 application listed below. Match manufacturer part number KT04379, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High Carbon Cast Iron Discs: Offer higher damping to cut vibration and noise improve brake feel and enhance heat transfer for shorter cooling times.
• OE-Matching Materials: Constructed from same high-carbon alloy as original equipment for reliable durability.
• Precise Fitment: Engineered as direct replacement for 2012-2018 CLS550 ensuring bolt-on compatibility.
• Prime Low-Met Pads: Deliver comfort quality and performance matching OE standards through patented compounds and full production control.
• Includes all OE-style mounting hardware for plug-and-play fit.
• Discs use high-carbon cast iron for better damping and heat management pads feature low-met compound for quiet smooth braking.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04379. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2012-2018 Mercedes-Benz CLS550?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2005-2010 Mercedes-Benz SLK55 AMG application listed below. Match manufacturer part number KT00C21, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise and vibration for quiet comfortable braking with low friction wear and minimal dust emission.
• High Carbon Cast Iron Discs: Offer higher damping coefficient than standard materials to cut vibration and noise while improving brake response and driving comfort.
• OEM-Matching Materials: Produced with the same high carbon content as original manufacturer discs for reliable replacement.
• Complete Kit: Includes two front rotors and pads with all components needed for straightforward service.
• Direct bolt-on replacement for OEM front brakes.
• High carbon construction matches OEM standards for durability.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00C21. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2005-2010 Mercedes-Benz SLK55 AMG?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2009-2016 Audi A4 Quattro 2.0T application listed below. Match manufacturer part number KT00B81, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise vibration friction wear and dust emissions keeping wheels clean with less maintenance.
• High Carbon Cast Iron Discs: Provide higher damping coefficient to cut vibration noise improve brake feel and enhance heat conduction for quicker cooling.
• OE Matching Materials: Use identical high carbon construction as original manufacturer for perfect fit and factory-level performance.
• Complete Front Kit: Includes two 320x30mm ventilated rotors and full pad set with all hardware for easy bolt-on installation.
• Xtra Special Alloy Discs: Deliver greater resistance to thermo-mechanical stress ensuring durability under heavy use.
• Yes it directly replaces OE front brakes on 2009-2016 Audi A4 Quattro 2.0T with 320mm rotors.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00B81. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2009-2016 Audi A4 Quattro 2.0T?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2007-2014 Mercedes-Benz CL600 application listed below. Match manufacturer part number KT00B42, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise and vibration for driving comfort while minimizing friction wear low dust emission keeps wheel rims clean and cuts maintenance needs.
• High Carbon Cast Iron Discs: Provide higher damping coefficient to cut vibration and noise improve brake response ensure driving comfort and offer better heat conduction for quicker cooling.
• Xtra Disc Alloy: Special high carbon materials tested for greater resistance to thermo-mechanical stress during hard braking.
• Complete Front Kit: Includes two 390x36mm vented discs and four ceramic pads with all necessary hardware for straightforward replacement.
• OE Matching Materials: Brembo uses identical materials to original manufacturer specs for seamless fit and performance.
• Direct bolt-on replacement no modifications required.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00B42. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2007-2014 Mercedes-Benz CL600?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

Brembo OE Front Disc Brake Kit is the exact Brembo OE configuration identified by manufacturer part number KT00B39 for the specifications and applications listed below. Confirm the exact manufacturer part number and all current specifications before ordering.

Key Features

• Prime Ceramic Brake Pads minimize noise and vibration for maximum driving comfort.
• For Xtra discs special alloy high carbon materials are produced and tested to have greater resistance to the thermo-mechanical stress to which the brake disc is subjected.
• Also, reduced friction wear and low dust emission means aesthetically beautiful wheel rims and less maintenance.

Fitment

Use the verified year, make, and model table below, then confirm the engine, drivetrain, body configuration, factory equipment, and every current manufacturer application note.

Specifications

What’s Included

One new Brembo OE front brake kit identified by manufacturer part number KT00B39 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

About Brembo OE

Brembo OE manufactures automotive performance and replacement parts identified by exact part number, specifications, and published application data.

Related Brembo OE Products

• Shop all Brembo OE products
• Brembo OE Front Disc Brake Kit
• Brembo OE Front Disc Brake Kit
• Brembo OE Rear Disc Brake Kit

Frequently Asked Questions

How do I confirm KT00B39 is correct?
Use the verified year, make, and model table below, then confirm the engine, drivetrain, body configuration, factory equipment, and every current manufacturer application note.

Are similar-looking parts interchangeable?
No. Match part number KT00B39, dimensions, configuration, included components, and every current manufacturer note.

What is included with this listing?
One new Brembo OE front brake kit identified by manufacturer part number KT00B39 in the configuration shown. Hardware or companion parts are included only when expressly stated by the manufacturer.

Installation

Follow the current Brembo OE instructions for part number KT00B39. Verify fit, clearance, system specifications, fastener torque, and safe operation before use. Professional installation is recommended when specialized tools, alignment, calibration, or fabrication are required.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2012-2018 Mercedes-Benz CLS550 application listed below. Match manufacturer part number KT00A62, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise and vibration for driver comfort while producing low dust to keep wheels clean and cut maintenance needs.
• High-Carbon Cast Iron Rotors: Provide higher damping to cut vibration and noise improve brake response and enhance heat conduction for quicker cooling.
• Xtra Disc Alloy: Special high-carbon formula tested for superior resistance to thermo-mechanical stress ensuring longer life under heavy use.
• OE-Matched Specifications: 360mm x 36mm vented rotors match factory dimensions for plug-and-play installation without modifications.
• Complete Kit: Includes two rotors and full pad set with hardware for front axle ready-to-install braking solution.
• Direct bolt-on replacement using same materials as original Mercedes-Benz equipment.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00A62. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2012-2018 Mercedes-Benz CLS550?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2012-2016 Mercedes-Benz SLK55 AMG application listed below. Match manufacturer part number KT00704, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• 355mm x 28mm Vented Rotors: Match OE specifications with 130.5mm height and 68mm center bore for precise fit and consistent braking on SLK55 AMG.
• Prime Ceramic Brake Pads: Minimize noise and vibration for driving comfort with low dust emission that keeps rims clean and reduces maintenance needs.
• High-Carbon Cast Iron Discs: Provide higher damping coefficient than standard materials to cut vibration and noise while improving brake response and driving comfort.
• Direct bolt-on replacement for OE part numbers A1724210312 A1724210412 and compatible pads.
• Yes KT00704 is a direct OE replacement for R172 SLK55 AMG base models with 355mm front rotors no adaptations required.
• Discs feature high-carbon cast iron for better damping and heat transfer pads use Prime ceramic compound for quiet low-dust operation.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00704. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 00-09 Honda S2000 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 01-07 Porsche 911/09-12 911 Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2012-2016 Mercedes-Benz SLK55 AMG?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.