This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2012 Audi S5 application listed below. Match manufacturer part number KTX0106, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Stopping Power: Vented 345mm rotors and low-met pads offer consistent grip without fade in demanding conditions.
• Durability: High-carbon construction resists cracking and vibration for longer service life than standard rotors.
• 345mm diameter high-carbon cast iron vented rotors with solvent-free UV coating on all surfaces.
• Quiet Operation: Low-met pads reduce noise dust and vibration for smooth daily driving.
• OE Fit: Matches Audi part 8K0615301M with UV coating on all surfaces for corrosion protection.
• Kit includes 2 rotors 2 pad sets and fixing screws for both front wheels.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KTX0106. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 10-11 Audi S4/08-12 S5 Front Disc Brake Kit
• Brembo OE 09-17 Audi Q5/11-16 S4/11-17 S5/14-17 SQ5 Rear Disc Brake Kit
• Brembo OE 10-13 Audi A3/09-13 A3 Quattro/08-09 TT/09-17 Volkswagen CC Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2012 Audi S5?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2008-2012 Audi S5 application listed below. Match manufacturer part number KTX4055, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Xtra High-Carbon Discs: Use special alloy materials tested for resistance to thermo-mechanical stress with 345mm x 30mm dimensions.
• Complete Hardware Kit: Includes all fixing components for simpler and safer installation without additional parts needed.
• Prime Low-Met Pads: Provide comfort and quality with patented solutions focused on performance matching OE standards through full production control.
• Discs match OE material specifications using high-carbon cast iron for reliable replacement.
• Kit weighs 55.1 lbs and ships in a 25 x 18 x 14 inch box.
• Brembo produces aftermarket discs with the same high-carbon cast iron as original equipment.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KTX4055. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 10-11 Audi S4/08-12 S5 Front Disc Brake Kit
• Brembo OE 09-17 Audi Q5/11-16 S4/11-17 S5/14-17 SQ5 Rear Disc Brake Kit
• Brembo OE 10-13 Audi A3/09-13 A3 Quattro/08-09 TT/09-17 Volkswagen CC Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2008-2012 Audi S5?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.