This Brembo performance brake kit is an exact-part-number brake component for the verified 2006-2010 Toyota RAV4 application listed below. Match manufacturer part number KT00748, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• OE Specifications: Rotors measure 296mm diameter x 28mm thickness, vented design ensures efficient heat dissipation and precise fit.
• Prime Ceramic Brake Pads: Minimize noise and vibration for quiet, comfortable drives with low dust emission to keep wheel rims clean and reduce maintenance needs.
• High Carbon Cast Iron Rotors: Match original manufacturer materials with higher damping to cut vibration and noise while improving heat conduction for quicker cooling.
• Xtra Disc Technology: Special high carbon alloy resists thermo-mechanical stress for longer life under heavy braking demands.
• Complete Kit: Includes two rotors and full pad set with hardware for direct bolt-on replacement without modifications.
• Kit weighs 20 lbs and ships in a sturdy box measuring 16 x 16 x 6 inches.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00748. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 06-08 Toyota RAV4 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 04-06 BMW 525i/06-07 525xi/04-07 530i/06-07 530xi/09-10 535i xDrive Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2006-2010 Toyota RAV4?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2006-2010 Toyota RAV4 application listed below. Match manufacturer part number KTX0132, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Reduce noise and vibration for driving comfort while low dust emission keeps wheel rims clean and cuts maintenance needs.
• High Carbon Cast Iron Discs: Provide higher damping to cut vibration and noise improve brake response and speed up cooling through better heat conduction.
• Xtra Discs: Use special high-carbon alloy tested for resistance to thermo-mechanical stress extending service life under heavy use.
• Complete Replacement Kit: Includes two Xtra front discs and two Prime pad sets with all hardware for straightforward bolt-on installation.
• OEM-Matched Materials: Brembo employs identical high-quality materials as original equipment for consistent performance and fit.
• Bolt-on design uses existing caliper mounting points.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KTX0132. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 06-08 Toyota RAV4 Front Disc Brake Kit
• Brembo OE 01-06 Lexus LS430 Front Disc Brake Kit
• Brembo OE 04-06 BMW 525i/06-07 525xi/04-07 530i/06-07 530xi/09-10 535i xDrive Front Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2006-2010 Toyota RAV4?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.