The Clutch Masters Rebuild Kit For (clm08913-TD7R-S) depends on an engine, transmission, swap, or companion-clutch configuration that cannot be represented safely by vehicle YMM alone. Match manufacturer part number RK08913-7R, engine and transmission combination, input-shaft spline, flywheel or bearing interface, clutch stage, disc type, and every application note before ordering.

Key Features

• Synchronous Twin Disc Design: Ensures seamless power transfer with minimal slip and 1200 ft-lbs torque capacity for track demands.
• Replacement Organic Friction Discs: High-heat resistant materials provide strong clutch bite and cut wear during hard driving.
• Heavy Duty Diaphragm Spring: Maintains clamping force through thousands of cycles for dependable shifts.
• Precision CNC Components: Factory tolerances eliminate vibration and simplify rebuild assembly.
• Requires OEM or Clutch Masters compatible flywheel with 11-inch diameter.
• Yes it matches coupe and convertible variants equipped with the original 8.3L or 8.4L V10 using the CLM08913-TD7R-S clutch.

Fitment

Specifications

What’s Included

One new Clutch Masters product in the exact configuration and quantity identified by manufacturer part number RK08913-7R. Flywheels, discs, pressure plates, bearings, cylinders, lines, valves, seals, adapters, pilot supports, fasteners, fluid, and tools are included only when expressly stated for this exact part number.

About Clutch Masters

Clutch Masters develops street and competition clutch, flywheel, release, and hydraulic products. Correct selection remains exact-vehicle, exact-drivetrain, exact-interface, exact-power-level, and exact-part-number specific.

Related Clutch Masters Products

• Clutch Masters 02-06 Acura RSX 2.0L 5spd / 02-10 Honda Civic SI 2.0L 6spd (For 08037-TD7R)
• Clutch Masters 07-11 MazdaSPEED3/MazdaSPEED6 Lightweight Steel Flywheel for 8.50in Twin Disc
• Clutch Masters 02-06 Acura RSX 2.0L 5 Sp (High Rev) / RSX 2.0L Type-S 6 Sp (High Rev) / 02-06 Honda

Browse the Clutch Masters collection for related clutch kits, flywheels, release components, and hydraulics.

Frequently Asked Questions

Why is fitment verification required for this Clutch Masters part?
The product depends on an engine, transmission, swap, or companion-part configuration that YMM alone cannot represent safely. Confirm every listed interface and the exact part number.

Should the flywheel be inspected or replaced with a new clutch?
Yes. Inspect the flywheel for heat damage, cracks, runout, and the correct step or friction surface. Resurface or replace it only according to the clutch and flywheel manufacturer’s specifications.

Is a clutch break-in period required?
Follow the current instructions for the exact clutch. Many street friction materials require controlled engagement cycles before full-torque use, while some race systems have different procedures.

Installation Instructions

Follow the current Clutch Masters and factory service instructions for this exact part number. Verify every interface before transmission removal, inspect and measure the flywheel and release system, replace worn seals and bearings, keep friction surfaces clean, use the specified fasteners and torque sequence, bleed hydraulic components, confirm release travel, and complete the required break-in procedure before full-torque use.