The Clutch Masters 2015 Subaru WRX 2.0L 6-Spd FX200 Clutch Kit is designed for the verified vehicle applications listed below. Match manufacturer part number 15020-HDKV, complete year, make, model, application, engine, transmission, input-shaft spline, flywheel requirement, clutch stage, disc type, and every application note before ordering.

Key Features

• Increased Torque Capacity: Rated at 435 ft-lbs handles 60 percent more power than stock 290 ft-lbs clutch without slippage.
• FX200 Kevlar Disc: Steel-backed pure Kevlar friction material ensures progressive engagement and withstands high heat for consistent performance.
• HD Pressure Plate: Heavy-duty design with higher clamp load provides firm shifts and extended service life under aggressive driving.
• Complete Kit Contents: Includes pressure plate clutch disc throwout bearing pilot bushing and alignment tool for full replacement.
• Street-Focused Design: Maintains daily drivability with minimal noise or chatter on 235mm OEM flywheel.
• 100 percent pure Kevlar with steel backing for smooth engagement high torque and resistance to fade during hard launches.

Fitment

Specifications

What’s Included

One new Clutch Masters product in the exact configuration and quantity identified by manufacturer part number 15020-HDKV. Flywheels, discs, pressure plates, bearings, cylinders, lines, valves, seals, adapters, pilot supports, fasteners, fluid, and tools are included only when expressly stated for this exact part number.

About Clutch Masters

Clutch Masters develops street and competition clutch, flywheel, release, and hydraulic products. Correct selection remains exact-vehicle, exact-drivetrain, exact-interface, exact-power-level, and exact-part-number specific.

Related Clutch Masters Products

• Clutch Masters 2015 Subaru WRX 2.0L 6-Spd FX100 Clutch Kit
• Clutch Masters 2015 Subaru WRX 2.0L 6-Spd FX250 Clutch Kit
• Clutch Masters 2015 Subaru WRX 2.0L 6-Spd FX300 Clutch Kit

Browse the Clutch Masters collection for related clutch kits, flywheels, release components, and hydraulics.

Frequently Asked Questions

Will this Clutch Masters part fit my 2015-2017 Subaru WRX Base?
That application is listed, but confirm the exact part number, engine, transmission, input-shaft spline, flywheel requirement, clutch stage, disc type, and every manufacturer note before ordering.

Should the flywheel be inspected or replaced with a new clutch?
Yes. Inspect the flywheel for heat damage, cracks, runout, and the correct step or friction surface. Resurface or replace it only according to the clutch and flywheel manufacturer’s specifications.

Is a clutch break-in period required?
Follow the current instructions for the exact clutch. Many street friction materials require controlled engagement cycles before full-torque use, while some race systems have different procedures.

Installation Instructions

Follow the current Clutch Masters and factory service instructions for this exact part number. Verify every interface before transmission removal, inspect and measure the flywheel and release system, replace worn seals and bearings, keep friction surfaces clean, use the specified fasteners and torque sequence, bleed hydraulic components, confirm release travel, and complete the required break-in procedure before full-torque use.