The Clutch Masters 01-09 Honda S2000 2.0L/2.2L FX100 Clutch Kit is designed for the verified vehicle applications listed below. Match manufacturer part number 08023-HR00, complete year, make, model, application, engine, transmission, input-shaft spline, flywheel requirement, clutch stage, disc type, and every application note before ordering.

Key Features

• 6-Puck Sprung Disc: 215mm diameter with 16-tooth spline provides quick positive engagement and smooth shifts without harshness for street use.
• Increased Clamp Load: Heavy duty pressure plate rated at 1875 lbs offers 15% more holding power than stock for reliable performance under load.
• Complete Kit Components: Includes throwout bearing pilot bushing and alignment tool to ensure proper installation and operation.
• Black Anodized Backing: Billet steel construction resists flex and wear for long service life in demanding conditions.
• 6-puck ceramic buttons on a sprung hub with Clutch Masters heat-resistant compound and black anodized steel backing plate.
• Requires removal of transmission and flywheel access. torque specs per Honda service manual.

Fitment

Specifications

What’s Included

One new Clutch Masters product in the exact configuration and quantity identified by manufacturer part number 08023-HR00. Flywheels, discs, pressure plates, bearings, cylinders, lines, valves, seals, adapters, pilot supports, fasteners, fluid, and tools are included only when expressly stated for this exact part number.

About Clutch Masters

Clutch Masters develops street and competition clutch, flywheel, release, and hydraulic products. Correct selection remains exact-vehicle, exact-drivetrain, exact-interface, exact-power-level, and exact-part-number specific.

Related Clutch Masters Products

• Clutch Masters 01-09 Honda S2000 2.0L/2.2L FX300 Clutch Kit
• Clutch Masters 01-09 Honda S2000 2.0L/2.2L FX350 Clutch Kit
• Clutch Masters 01-09 Honda S2000 2.0L/2.2L FX400 6-Puck Clutch Kit

Browse the Clutch Masters collection for related clutch kits, flywheels, release components, and hydraulics.

Frequently Asked Questions

Will this Clutch Masters part fit my 2001-2009 Honda S2000 Base?
That application is listed, but confirm the exact part number, engine, transmission, input-shaft spline, flywheel requirement, clutch stage, disc type, and every manufacturer note before ordering.

Should the flywheel be inspected or replaced with a new clutch?
Yes. Inspect the flywheel for heat damage, cracks, runout, and the correct step or friction surface. Resurface or replace it only according to the clutch and flywheel manufacturer’s specifications.

Is a clutch break-in period required?
Follow the current instructions for the exact clutch. Many street friction materials require controlled engagement cycles before full-torque use, while some race systems have different procedures.

Installation Instructions

Follow the current Clutch Masters and factory service instructions for this exact part number. Verify every interface before transmission removal, inspect and measure the flywheel and release system, replace worn seals and bearings, keep friction surfaces clean, use the specified fasteners and torque sequence, bleed hydraulic components, confirm release travel, and complete the required break-in procedure before full-torque use.