Product Overview

Brembo KT00682 is an OE-line rear disc-and-pad brake kit for the applications shown below. Brembo requires application details to be checked because brake packages can vary within the same model year.

Key Features

• Matched Brembo brake discs and Prime ceramic brake pads.
• Designed for controlled stopping performance and application-specific fit.
• Ceramic pad formulation supports low noise and reduced visible dust.
• OE-line replacement kit for the rear axle.

Vehicle Fitment

Select KT00682 only after confirming the VIN, axle position, rotor dimensions and installed brake package in Brembo’s current catalogue.

Specifications

What’s Included

The KT00682 package contains the matched Brembo discs and pads supplied for this exact kit. Sensors, calipers, fluid and unrelated hardware are separate unless listed by Brembo for the vehicle.

About Brembo

Brembo develops original-equipment and aftermarket brake components. Use its current catalogue and assembly instructions for the exact vehicle and brake system.

Related Parts

Browse related Brembo brake components. Verify axle position and brake-package compatibility for every part.

Frequently Asked Questions

What is the KT00682?

It is the exact Brembo rear disc-and-pad kit described in this listing.

Does the model year alone confirm fitment?

No. Confirm the VIN, trim, axle position, rotor size and installed brake package.

Are pads included?

Yes. The kit is listed with matched Brembo Prime ceramic pads and brake discs.

Is this for both axles?

No. This kit is for the rear axle only.

Should discs be replaced in axle pairs?

Yes. Replace discs and pads as a matched axle set following Brembo and vehicle procedures.

Is professional installation recommended?

Yes. Brake service is safety-critical and should be completed by a qualified technician.

Where are the current instructions?

Use Brembo’s official assembly-instructions portal and enter the exact product code.

What is required after installation?

Follow the specified bedding, fluid-level, torque and safety checks before returning the vehicle to service.

Installation

Review the official Brembo assembly instructions for KT00682.

1. Confirm VIN-specific compatibility and the rear axle application.
2. Measure or identify the installed rotor and brake package before disassembly.
3. Replace discs and pads on both sides of the axle using Brembo and OEM procedures.
4. Torque fasteners and wheels to the applicable specifications.
5. Complete bedding and brake-function checks in a safe area.

California Proposition 65 Information

Review the manufacturer’s current product documentation and applicable California warning requirements before installation.