This Brembo performance brake kit is an exact-part-number brake component for the verified 1999 Volkswagen Passat GLS application listed below. Match manufacturer part number KT00468, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Minimize noise vibration friction wear and dust emissions for driving comfort clean wheels and reduced maintenance.
• High Carbon Cast Iron Rotors: Offer higher damping coefficient to decrease vibration noise improve brake response driving comfort and heat conduction for shorter cooling times.
• OE Matching Materials: Use identical high carbon content as original manufacturer discs for authentic fit performance and durability.
• Xtra Disc Alloy Option: Special high carbon alloys tested for greater resistance to thermo-mechanical stress during heavy braking.
• Complete Kit: Includes everything needed for rear brake replacement with direct bolt-on compatibility no modifications required.
• Rotors feature high carbon cast iron for better heat dissipation damping. Pads are Prime Ceramic for low dust noise-free operation.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00468. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 99-03 Volkswagen Passat Rear Disc Brake Kit
• Brembo OE 99-02 Volkswagen Cabrio/95-99 Golf/Jetta/95-97 Passat Rear Disc Brake Kit
• Brembo OE 99-02 Volkswagen Cabrio/95-99 Golf/Jetta/95-97 Passat Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 1999 Volkswagen Passat GLS?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 1999-2002 Audi A4 Quattro application listed below. Match manufacturer part number KT04198, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• OE-Quality Replacement Direct fit with factory-level performance.
• Complete Kit Includes pads, rotors, and all necessary hardware.
• High-Carbon Rotor Material Better heat dissipation and reduced vibration.
• A: Yes. It includes rear rotors and Low-Met pads for both sides plus hardware.
• Low-Met Pad Compound Reliable performance and durability.
• Designed for 19992005 Volkswagen Passat models (including 4Motion).

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT04198. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 99-03 Volkswagen Passat Rear Disc Brake Kit
• Brembo OE 99-02 Volkswagen Cabrio/95-99 Golf/Jetta/95-97 Passat Rear Disc Brake Kit
• Brembo OE 99-02 Volkswagen Cabrio/95-99 Golf/Jetta/95-97 Passat Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 1999-2002 Audi A4 Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.