This Brembo performance brake kit is an exact-part-number brake component for the verified 2016-2022 Audi TTS Quattro application listed below. Match manufacturer part number KT00878, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• High-Carbon Cast Iron Rotors: Vented 340mm x 30mm design (Part 09.C892.11) resists warping and improves thermal conductivity for sustained braking under load.
• Ceramic Brake Pads: Low-dust low-noise compound (Part P85099) offers reliable grip and smooth response compatible with OEM calipers.
• Complete Hardware Kit: Includes clips and anti-rattle components for secure installation without additional parts.
• OE Specifications: Matches Audi factory dimensions and tolerances for plug-and-play fit on TTS Quattro models.
• Brembo Quality: Built to exceed OEM standards ensuring long service life and consistent performance.
• Kit weighs approximately 28 lbs and ships in a sturdy box measuring 16 x 14 x 8 inches.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KT00878. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 16-22 Audi TTS Quattro Front Disc Brake Kit
• Brembo OE 15-20 Audi A3 Quattro/19-23 Q3/15-20 S3/16-23 TTS Quattro/19-23 Arteon Rear Disc Brake Kit
• Brembo OE 15-20 Audi A3 Quattro/19-23 Q3/15-20 S3/16-23 TTS Quattro/19-23 Arteon Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2016-2022 Audi TTS Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.

This Brembo performance brake kit is an exact-part-number brake component for the verified 2016-2022 Audi TTS Quattro application listed below. Match manufacturer part number KTX0139, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• Prime Ceramic Brake Pads: Provide smooth braking with minimal noise, vibration, and dust buildup for cleaner wheels and extended service life.
• High Carbon Cast Iron Rotors: Offer improved heat dissipation, higher damping for less vibration, and faster cooling under heavy use.
• Xtra Disc Technology: Uses special high-carbon alloy for increased resistance to cracking and stress in demanding conditions.
• OE Specifications: Matches factory materials and dimensions for bolt-on fitment without modifications.
• Complete Kit: Includes rotors, pads, and all hardware for full front brake replacement.
• Kit weighs 27 lbs and ships in one box measuring 15 x 15 x 7 inches.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number KTX0139. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo OE 16-22 Audi TTS Quattro Front Disc Brake Kit
• Brembo OE 15-20 Audi A3 Quattro/19-23 Q3/15-20 S3/16-23 TTS Quattro/19-23 Arteon Rear Disc Brake Kit
• Brembo OE 15-20 Audi A3 Quattro/19-23 Q3/15-20 S3/16-23 TTS Quattro/19-23 Arteon Rear Disc Brake Kit

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2016-2022 Audi TTS Quattro?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.