Front Disc and Ceramic Pad Kit

Brembo KT00610 supplies two 09.A402.11 brake discs and one P11019N ceramic brake pad set for the front axle. The exact component quantities are confirmed in the supplier bill of materials.

Key Features

• Front axle kit.
• Two 320 mm diameter rotors with 28 mm nominal thickness.
• One PRIME ceramic brake pad set.
• Disc construction: Ventilated.
• Manufacturer kit number: KT00610.

Fitment

Before ordering KT00610, confirm the exact vehicle brake package, rotor dimensions, caliper and pad configuration. The listed vehicle references require application-specific brake-option confirmation.

Specifications

What’s Included

• Two Brembo 09.A402.11 brake discs.
• One Brembo P11019N ceramic brake pad set.

The Brembo KT00610 kit contents above are identified by their exact component numbers. Confirm any application-dependent fitting hardware in the supplied package. Calipers, brake fluid and tools are separate.

Related Parts

• Brembo 09.A402.11 exact kit component
• Brembo P11019N exact kit component

About Brembo

Brembo manufactures original-equipment and replacement braking components. Correct kit selection depends on the specific disc, pad and installed vehicle brake configuration.

FAQ

What is the KT00610?

It is a Brembo front disc-and-pad kit containing two 320 mm rotors and one ceramic pad set.

Does this kit cover all four wheels?

No. This kit supplies the listed disc and pad components for one axle. Select the other axle separately.

Which exact components are supplied?

The kit bill of materials identifies two 09.A402.11 discs and one P11019N pad set.

Does the year and model alone confirm compatibility?

No. Verify the exact brake package, rotor dimensions, installed caliper, pad profile and all application restrictions.

Are calipers included?

No. The verified kit contents are the listed rotors and pad set. Calipers, tools and brake fluid are separate.

Are all sensors and fasteners universally included?

No. Inspect the exact supplied package and manufacturer component notes for any application-dependent sensor or hardware requirements.

Should the kit photograph determine the part selection?

Select by the exact kit and component numbers, specifications and vehicle brake configuration. A representative image does not establish package contents.

Which installation procedure applies?

Follow the vehicle service information and the Brembo instructions for the exact rotor and pad application, including direction, runout, fasteners and bedding.

Installation Instructions

1. Verify the exact kit components, factory brake package and required service parts before disassembly.
2. Follow the vehicle and Brembo service instructions. Inspect hubs, calipers, bearings, sensors and mounting surfaces.
3. Install the correct components with any required service hardware. Check direction, runout, clearances and fastener-specific torque.
4. Complete the specified bedding and operational checks before normal driving.