This Brembo brake rotor is an exact-part-number brake component for the verified 2009-2010 Nissan GT-R application listed below. Match manufacturer part number BRB109.9025A, front or rear position, factory brake package, rotor and caliper configuration, wheel clearance, and every application note before ordering.

Key Features

• CCM-R Material: Carbon ceramic matrix withstands over 1000C for zero fade during repeated hard stops.
• 2-Piece Construction: Aluminum hat floats against carbon rotor cuts rotational inertia for sharper handling.
• 380x34mm Size: Precision dimensions ensure bolt-on fit with Brembo GT calipers on GT-R.
• Drilled Surface: Improves heat dissipation and water evacuation for shorter stops in all conditions.
• Direct OEM Replacement Style: Matches GT-R hub and caliper specs for seamless performance upgrade.
• Bolt-on with existing hardware no modifications needed.

Fitment

Specifications

What’s Included

One new Brembo product identified by manufacturer part number BRB109.9025A. Rotors, pads, calipers, brackets, lines, sensors, hardware, fluid, tools, and companion service parts are included only when expressly stated for this exact part number.

About Brembo

Brembo develops original-equipment replacement and performance braking components, including rotors, pads, calipers, brake kits, fluid, sensors, and related hardware. Correct selection remains exact-application and exact-part-number specific.

Related Brembo Products

• Brembo 05-11 997 GT3 Cup Front 2-Piece Discs 380×34 2pc Rotor Slotted Type-3
• Brembo 06-08 RS4 Front 2-Piece Discs 380×34 2pc Rotor Drilled
• Brembo 06-09 997.1 GT3/GT3RS (PCCB Equipped) Front 2-Piece Discs 380×34 2pc Rotor Slotted Type3

Browse the Brembo collection for related brake components.

Frequently Asked Questions

Will this Brembo part fit my 2009-2010 Nissan GT-R?
That application is listed, but confirm the front or rear position, factory brake package, rotor diameter and design, caliper type, wheel clearance, production split, and every Brembo application note before ordering.

Should brake components be replaced in axle pairs?
Friction parts are normally serviced in axle sets to maintain balanced braking. Follow the vehicle service procedure and inspect the opposite side, calipers, hoses, hardware, wheel bearings, and brake fluid before installation.

What should be checked before installing this Brembo part?
Compare every component and part number, verify wheel and caliper clearance, inspect mounting and sealing surfaces, measure rotor and hub runout when applicable, use specified torque values, bleed the system correctly, and follow the required bedding procedure.

Installation Instructions

Follow the current Brembo instructions and factory service information for this exact part number. Support the vehicle safely, compare all parts before removal, clean and inspect mounting surfaces, verify runout and wheel clearance, replace one-time hardware and seals as required, use specified torque values, bleed with the correct fluid, check for leaks and free wheel rotation, complete the required bedding procedure, and recheck operation before road use. Professional brake installation is strongly recommended.