Rear Brake Pad Set for Lucas Brake Systems

Brembo P85073 is a PRIME replacement pad set. The manufacturer specifies the rear axle and the technical details below. Confirm the installed brake package before ordering.

Key Features

• Rear axle application.
• PRIME replacement brake pads.
• Manufacturer part number: P85073.
• Brake system: Lucas.
• Wear indication: Prepared for wear indicator.

Fitment

The vehicle applications below are catalog references and do not confirm every factory brake option. Before ordering P85073, verify the VIN or brake option/PR code, caliper, pad shape, dimensions and all application notes. Modified brake systems require separate confirmation.

Specifications

What’s Included

• One Brembo P85073 brake pad set for one compatible brake application.
• Manufacturer-listed accessories: With accessories With anti-squeal shim With brake caliper bolts.

Brake discs, calipers and tools are not included. Confirm separately required sensors and service hardware for the vehicle; do not assume additional parts are supplied.

About Brembo

Brembo manufactures original-equipment and replacement braking components. Its application catalogue identifies the brake-system details and restrictions that must be checked when selecting replacement parts.

FAQ

What is the P85073?

It is a Brembo PRIME replacement brake pad set for the rear axle on compatible brake systems.

Does the year, make and model alone confirm fitment?

No. Factory brake packages can differ within a model year. Confirm the VIN, brake option or PR code, caliper and disc configuration against the exact application notes before ordering.

Are these front or rear pads?

These pads are specified for the rear axle. Match that position to the vehicle service requirement.

Can I choose these pads by appearance alone?

No. Compare the exact part number, brake system, pad shape, dimensions and wear-indicator connection.

Are brake discs or calipers included?

No. This listing is for a brake pad set. Discs, calipers and installation tools are separate.

What wear-indicator arrangement is specified?

Prepared for wear indicator. Confirm the connector and any separately required sensor against the vehicle.

Will these fit aftermarket brake conversions?

A brake conversion can require a different pad. Identify the installed caliper and conversion-kit specifications before ordering.

What should be checked before fitting?

Compare the new and removed pads, inspect the discs and hardware, and follow the vehicle and Brembo service instructions. Do not install pads that differ from the required brake application.

Installation Instructions

1. Identify the factory brake option and compare the replacement pads with the removed parts before disassembly proceeds.
2. Inspect the discs, calipers, slides, sensors and hardware using the vehicle service procedure.
3. Install the correct pads and applicable service hardware according to the vehicle and Brembo instructions. Use only the specified torque and lubrication locations.
4. Complete the specified checks and bedding procedure before normal use.