ACT 2007 Subaru Outback XACT Flywheel Streetlite | 600890

This product is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT’s Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts. Browse the complete ACT performance.

Use ACT manufacturer part number 600890 to confirm the exact drivetrain component and application.

Key Features

• Part Fitment Requirement:240mm upgrade. Must be used with ACT 240mm pressure plate SB020 or SB020X and corresponding ACT 240mm clutch disc (not included). Pilot bearing PB1004 included. Pressure Plate Bolts included (M8-1.25 x 16mm).

Fitment

Vehicle fitment is a starting point. Confirm every drivetrain specification and the exact ACT part number before installation.

Confirm 600890 against the complete ACT application before ordering.

Specifications

Manufacturer Part Number: 600890

Whats Included

The exact ACT flywheel and quantity identified by the product title and MPN. Bearings, alignment tools, flywheel bolts, pressure-plate bolts, hydraulic parts, and related hardware are included only when specifically stated.

About ACT

ACT develops application-specific clutch kits, friction discs, pressure plates, flywheels, bearings, and supporting drivetrain components for street and motorsport use. Black Ops Auto Works organizes every ACT listing by exact MPN and verified vehicle application.

The 600890 should be selected as part of a complete matched ACT drivetrain system.

Related Parts

• ACT 1999 Acura Integra XACT Flywheel Prolite
• ACT 1999 Acura Integra XACT Flywheel Streetlite
• Shop the complete ACT clutch and drivetrain collection

Frequently Asked Questions

What is the 600890?

It is the ACT flywheel described in this listing for the stated application and use.

How do I confirm fitment?

Match the complete year, make, model, engine, transmission and every qualifier shown in the title and fitment section.

Is this intended for street use?

Use suitability depends on the specific disc, pressure plate, flywheel and clutch configuration shown in the listing.

Can I mix clutch components from different kits?

Do not assume components are interchangeable. Verify spline, diameter, step height, release system and the complete matched ACT assembly.

Does installation require break-in?

Follow the current ACT instructions for the exact clutch and disc type. Street friction systems commonly require a controlled break-in period; race products can differ.

Should the flywheel be inspected or resurfaced?

Yes. Inspect the mating surface and use only a compatible flywheel prepared to ACT specifications. Replace damaged or out-of-spec components.

Is professional installation recommended?

Yes. Clutch and flywheel work requires correct transmission removal, fastener torque, alignment, release-system setup and safety procedures.

Can Black Ops Auto Works help verify the application?

Yes. Provide the vehicle, engine, transmission, existing flywheel, power level and intended street or competition use before ordering.

Installation Instructions

1. Confirm ACT part and the complete engine, transmission, flywheel, spline, and release-system application before disassembly.
2. Inspect every component and compare the new part with the removed assembly before modifying or installing anything.
3. Inspect the flywheel or friction surface, pilot support, release bearing, fork, pivot, hydraulic system, seals, and mounting hardware.
4. Clean friction surfaces correctly and keep oil, grease, and fingerprints away from the clutch disc and mating faces.
5. Use the vehicle service procedure and current ACT instructions for alignment, fasteners, torque sequence, release travel, and clearances.
6. Verify smooth release, correct free play, clean gear engagement, and leak-free operation before road use.
7. Complete the manufacturer-specified break-in procedure before launches, dyno pulls, racing, towing, or full-torque operation.

California Proposition 65: WARNING: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm.